مرحبًا بك إلى بنك الأسئلة، حيث يمكنك طرح الأسئلة وانتظار الإجابة عليها من المستخدمين الآخرين
0 تصويتات
في تصنيف الغاز بواسطة (360 نقاط)

Fiberglass Mesh

Fiberglass mesh is cheap material that does not burn and is characterized by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades, as well as use on internal wall and ceiling surfaces. This material is widely used for fastening the surface layer at the corners of the room.

Most widely used standard fiberglass plater mesh is the density of 145g/m2 and 165g/m2 for exterior cladding and facade work. Resistant to alkalis, does not decompose and will not rust over time, it does not emit toxic and harmful substances, has a high resistance to tearing and stretching, protects the surface from cracking and improves its mechanical strength. Easy to handle and use.

Application of Fiberglass Mesh

Fiberglass mesh is used to strengthen the surface of the plaster layer all kinds of buildings.

This mesh reinforced liquid waterproofing layers slabs and roofs.

Fiberglass mesh used to impart mechanical strength filler floor coverings that are different self-leveling properties.

Application of glass fiber mesh contributes to strengthening plaster, and the bases used for laying ceramic tiles.

VERY HIGH STRENGTH AND ELASTICITY FIBERGLASS SELF-ADHESIVE TAPE

Fiberglass Self Adhesive Tapehttp://www.gyfiberglassproduct.com/fiberglass-self-adhesive-tape/ has a mesh structure and uniformly applied adhesive system. It is easy to attach it to any surface, and allows high-quality and fast operation even to non-professionals. We can cut off a piece from a roll to required length, and paste it on the seam, just press it.

The special fiberglass tape is used to prevent the formation of cracks and surface hardening. It is used for gluing joints, corners, ceilings, gluing joints and places of contiguity.

Application:

the junction of gypsum board, particle board, hardboard and other sheet materials;

gluing joints between the door and window frames to the walls;

sizing of cracks, corners and joints in concrete, plaster surfaces;

for continuous reinforcement of walls and ceilings.

Note: before applying adhesive to prepare the surface. Surface preparation is to clean it from dust and dirt. If there is a need to make sanding.

Features and Benefits:

Increases the strength of coatings, resistance to alkalis, does not rust , is not subject to decay, prevents cracking.

High-quality adhesive composition;

Compatible with all types of fillers and plasters;

Take on the burden associated with the constant changes in temperature and humidity ;

إجابتك

اسمك الذي سيظهر (اختياري):
نحن نحرص على خصوصيتك: هذا العنوان البريدي لن يتم استخدامه لغير إرسال التنبيهات.
مرحبًا بك إلى بنك الأسئلة، حيث يمكنك طرح الأسئلة وانتظار الإجابة عليها من المستخدمين الآخرين.

اسئلة متعلقة

0 تصويتات
0 إجابة
سُئل يونيو 20 في تصنيف الغاز بواسطة as852143 (360 نقاط)
0 تصويتات
0 إجابة
سُئل يونيو 20 في تصنيف الغاز بواسطة as852143 (360 نقاط)
0 تصويتات
0 إجابة
سُئل يونيو 15 في تصنيف حلول الكتب الدراسية بواسطة as852136 (300 نقاط)
0 تصويتات
0 إجابة
سُئل منذ 3 أيام في تصنيف الغاز بواسطة as852153 (300 نقاط)
–1 تصويت
0 إجابة
سُئل يونيو 22 في تصنيف رياضة بواسطة as852148 (320 نقاط)
...